Coproduction of Ethyl Acetate and n‐Butyl Acetate by Using a Reactive Dividing‐Wall Column

The performance of the reactive distillation dividing‐wall column for coproduction of ethyl acetate and butyl acetate was experimentally studied. n‐Butanol and ethanol are raw reaction materials that react with acetic acid in the reaction zone to produce n‐butyl acetate and ethyl acetate, respectively. n‐Butyl acetate is not only a product, but also acts to remove water generated by the esterification reactions. The effects of various parameters, such as catalyst loading per stage, reflux ratio, liquid split and molar feed ratios, ethyl acetate/n‐butyl acetate purity, pressure drop, and total energy consumption, are investigated. Results show that ethanol could be completely converted and the products could be easily separated, which shows great industrial application potential in the coproduction of ethyl acetate and n‐butyl acetate.     

Preparation of ZrC/SiC porous self-supporting monoliths via sol-gel process using polyethylene glycol as phase separation inducer

We present a straightforward method via sol-gel process using polyethylene glycol (PEG) as phase separation inducer to prepare zirconium carbide/silicon carbide (ZrC/SiC) porous monoliths. Organic/inorganic hybrid gels are prepared using zirconium oxychloride, furfuryl alcohol, and tetraethyl orthosilicate as major starting materials. In the presence of PEG, crack-free hybrid monoliths are obtained by drying the wet gels under ambient pressure, whereas in the absence of PEG, the wet gels break into pieces as expected. PEG plays a key role in maintaining the macroscopic shape of the monoliths. After ceramization at 1300–1500?°C, ZrC/SiC porous monoliths are obtained. SEM and mercury intrusion porosimetry data show that PEG also has strong influence on the microstructures of the monoliths. The compressive strengths of the ceramic monoliths are in the range of 0.3 to 0.7?MPa. And their compressive behavior starts to differ due to the changes in their microstructures, especially the pore structure.     

New anti-ablation candidate for carbon/carbon composites: Preparation,composition and ablation behavior of Y2Hf2O7 coating under an oxyacetylene torch

Y₂Hf₂O₇ possesses low thermal conductivity and high melting point, which make it promising for a new anti-ablation material. For evaluating the thermal stability and the potential applications of Y₂Hf₂O₇ on anti-ablation protection of C/C composites, Y₂Hf₂O₇ ceramic powder was synthesized by solution combustion method and Y₂Hf₂O₇ coating was prepared on the surface of SiC coated C/C composites using SAPS. Results shown that the coating exhibits good ablation resistance under the heat flux of 2.4?MW/m² with the linear and mass ablation rates are 0.16?μm?s^?1 and ?0.028?mg?s^?1, respectively, after ablation for 40?s. With the prolonging of the ablation time, the increasing thermal stress causes the increase of cracks. Moreover, the chemical erosion from SiO₂ and the physical volatilization of low temperature molten products aggravate failure of the Y₂Hf₂O₇ coating.     

Ferroelectric,upconversion emission and optical thermometric properties of color-controllable Er3+-doped Pb(Mg1/3Nb2/3)O3-PbTiO3-Pb(Yb1/2Nb1/2)O3 ferroelectrics

The (0.98-x)(0.6Pb(Mg_1/3Nb_1/3)O₃-0.4PbTiO₃)-xPb(Yb_1/3Nb_1/3)O₃-0.02Pb(Er_1/2Nb_1/2)O₃ ((0.98-x)(PMN-PT)-xPYN:Er³⁺) ceramics were prepared through a solid-state reaction method. The phase structure, piezoelectric response, ferroelectric performance and upconversion emission of the ceramics were systematically investigated. The phase structure, the electrical and optical properties are strongly related to the content of PYN. The optimized piezoelectric response and upconversion emissions of the ceramics were achieved near x = 0.12, which locates in the morphotropic phase boundary (MPB) composition. Furthermore, the temperature sensing behaviors of the resultant compounds based on the thermally coupled levels of ²H_11/2 and ⁴S_3/2 of Er³⁺ ions in the temperature range of 133–573 K were studied by utilizing the fluorescence intensity ratio technique. Additionally, the thermal effect, which is induced by the laser pump power, of the studied ceramics is also investigated and the produced temperature is enhanced from 268 to 348 K with the pump power rising from 109 to 607 mW.     

Influence of whisker-aspect-ratio on densification,microstructure and mechanical properties of Al2O3 whiskers-reinforced CeO2-stabilized ZrO2 composites

A novel composite of 12 mol% CeO₂-stablized tetragonal ZrO₂ reinforced with Al₂O₃ whiskers (designated as Ce-TZP/A_w) has been prepared and studied in this work. The objective of this investigation was to systematically study the influence of whisker-aspect-ratio on the densification behaviors, microstructure evolution, and mechanical properties of Ce-TZP/A_w composite. Results showed that the sintered density of composite increased and the grain growth tended to diminish with the decrease in whisker aspect radio. Both the fracture toughness and flexural strength reached maximum values of 475 ± 12 MPa and 11.4 ± 0.2 MPa m^1/2, respectively at a whisker aspect ratio of about 12. It was also observed that the fracture toughness, flexural strength and tetragonal to monoclinic ZrO₂ transformation of the dual-phase composite exhibited similar variation trend as a function of the whisker-aspect-ratio, which suggested that the stress-induced phase transformation should be the main toughening and strengthening mechanism in the Ce-TZP/A_w composite.     

Enhanced energy storage properties of Ba0.4Sr0.6TiO3 lead-free ceramics with Bi2O3-B2O3-SiO2 glass addition

In this study, we present an effective strategy to enhance the energy storage properties of Ba_0.4Sr_0.6TiO₃ (BST) lead-free ceramics by the addition of Bi₂O₃-B₂O₃-SiO₂ (BBS) glass, which were prepared by the conventional solid state sintering method. The phase structure, microstructure and energy storage properties were investigated in detail. It can be found that the Ba_0.4Sr_0.6TiO₃-x wt%(Bi₂O₃-B₂O₃-SiO₂) (BST- x wt%BBS, 0 ≤ x ≤ 12) ceramics possess large maximum polarization (P_max), low remanent polarization (P_r) and slim polarization electric field (P-E) hysteresis loops. The breakdown strength (BDS), recoverable energy storage density (W_rec) and energy storage efficiency (η) are enhanced obviously with the addition of BBS glass. The BST-9 wt%BBS ceramic is found to exhibit excellent energy storage properties with a W_rec of 1.98 J/cm³ and a η of 90.57% at 279 kV/cm. These results indicate that the BST-x wt%BBS ceramics might be good candidates for high energy storage applications.     

Reducing undesirable vibrations of planar linkage mechanism with joint clearance

An optimization design method is presented to reduce the undesirable vibrations caused by clearance for planar linkage mechanism. A clearance joint is defined and considered a contact/impact force constraint. Contact and impact force models for the clearance joint are established using a normal contact force model based on Hertz model with energy loss and a tangential friction model based on modified Coulomb model with dynamic friction coefficient, respectively. In view of the clearance joint, dynamic equations and optimization method for a planar four-bar mechanism are then presented as an application example. The optimization aims to minimize the maximum absolute acceleration peaks of the mechanism by determining the link lengths of the planar linkage mechanism. Finally, the optimization design is solved by a generalized reduced gradient algorithm. Results show evident decrease in vibration peaks of the mechanism and obvious reduction in the contact forces in the clearance joint, which contribute to a good performance of planar linkage mechanism systems.     

UHMWPE/HDPE/纳米SiO2共混体系的毛细管挤出流变行为

采用毛细管流变仪,研究了超高分子量聚乙烯(UHMWPE)/高密度聚乙烯(HDPE)/纳米二氧化硅(SiO2)共混体系,及其对照组的流变行为和挤出过程中的不稳定流动现象,分析了共混物发生鲨鱼皮畸变和整体破裂的临界剪切应力和临界剪切速率的变化情况。结果表明,经过偶联剂改性的纳米SiO2粒子,在PE基质的共混体系中存在一定的界面黏附作用,降低了纳米共混体系的挤出胀大比,弹性特征减轻。这种界面相互作用限制了纳米共混材料在口模区域的黏性流动以及分子链离开口模后的构象恢复,降低了发生流动不稳定现象的临界剪切速率,发生鲨鱼皮畸变的临界剪切应力增大,整体破裂后,形成交替出现"鲨鱼皮-破裂"的振荡性变化外观。     

CO2对油田地下水环境中Q235钢和X70钢腐蚀行为的影响

为了探明辽河油田地下水环境中CO₂对Q235钢和X70管线钢的腐蚀规律,采用动电位极化技术及交流阻抗技术研究了不同CO₂浓度对该环境下两种钢腐蚀行为的影响,并利用光学显微镜对试样腐蚀界面进行表征。结果表明:随着CO₂浓度的增加,Q235和X70钢的交流阻抗图谱的半径均减小,腐蚀电流密度增大,腐蚀坑数量、深度和面积都增加,腐蚀敏感性增大。在低浓度CO₂环境下(CO₂含量为10%时),Q235钢的腐蚀敏感性比X70钢更高;而在高浓度CO₂环境下(CO₂含量为20%、40%、60%时),Q235钢的腐蚀速率反而较小,耐腐蚀性更好。